This stylish pair of slim pants is designed with simple lines and a cropped length, making them perfect for any occasion. Features include slash pockets, front fly, and waistband with belt loops. Dress up or down for a chic, clean look! Download your free PDF sewing pattern now!
1 cm seam allowance included!
Material
- 1.7 m of suiting (twill, gabardine, chino…)
- 0.3 m of light poplin or broadcloth
- 1.1 m of light fusible interfacing
- All-purpose thread
- Universal needle
- 1x zipper for pants (length 15 cm)
- 1x button (1.5 cm wide)
- Loop turner
- OPTIONAL: bias tape
PLEASE NOTE! Fabric requirements are based on a width of 150 cm (59″). If your fabric is narrower, you may need more fabric!
Download the free PDF sewing pattern…
… and once you’re done, share a photo of you wearing proudly your new pair of slacks with #unfetteredpatterns or tag us @unfetteredpatterns!
Need help to print your pattern? Check our detailed tutorial here! Also, find out how you can customize your pattern for A0 printers and projectors here.
Sizing Guide
This pattern is drafted according to the following body measurements. Standard height is 1.64 m (5.4 ft). Check this tutorial if you want to add sizes to your pattern!
| XXS | XS | S | M | L | XL | XXL | |
| Bust | 85 cm | 89 cm | 93 cm | 99 cm | 105 cm | 113 cm | 121 cm |
| Waist | 64 cm | 68 cm | 72 cm | 78 cm | 84 cm | 92 cm | 100 cm |
| Hips | 92 cm | 96 cm | 100 cm | 106 cm | 112 cm | 120 cm | 128 cm |
Finished garment measurements
- Rise: approx. 29 cm
- Inseam: 61 cm
Construction Order
The following points break down all the step you need to complete this project. However, please note that they only cover the basics!
Reminder that seam allowances are 1 cm wide, unless stated otherwise.
- Fuse the belt, fly shield and fly facing.
- Sew the pocket backings to the pocket linings.
- Assemble the front pockets. **You may need to stay-stitch the pocket openings before sewing the linings.
- Sew the back darts.
- Sew the side seams and inseams.
- Sew the crotch, leaving an opening above the front notch.
- Assemble the front fly and topstitch the crotch (front and back).
- Make the belt loops (turn to right side with the loop turner) and cut the two pieces in three to get six belt loops.
- Sew the belt loops to the waist (refer to markings for placement).
- Attach the belt. You can finish the inner edge of the waistband with bias tape. Also, use the “stitch in the ditch” technique to sew the bottom of the waistband in place.
- Sew the remaining end on each loop to the top of the belt.
- Hem the bottom of the legs (turn once 3 cm).
- Add the button and buttonhole (see pattern for placement).
Good luck with your sewing project!
You can now support me on Ko-Fi! Any amount helps covering the fees for pattern making and illustrating software, fabrics, threads… If you can’t afford a donation, you can also support the blog by liking, sharing and commenting my posts. Thanks!
Il cartamodello è free?
Finished garment measurements?