Two-piece set in jersey – Free sewing pattern download PDF #UP1049

---

---

Download the free PDF sewing pattern…

… and once you’re done, share a photo of you wearing proudly your new handmade outfit with #unfetteredpatterns or tag us @unfetteredpatterns!

Need help to print your pattern? Check our detailed tutorial here! Also, find out how you can customize your pattern for A0 printers and projectors here.

---

Sizing Guide

This pattern is drafted according to the following body measurements. Standard height is 1.64 m (5.4 ft). Check this tutorial if you want to add sizes to your pattern!

	XS	S	S/M	M	M/L	L	XL
Bust	85 cm (33 1/2″)	89 cm (35″)	93 cm (36 1/2″)	97 cm (38″)	101 cm (39 1/2″)	105 cm (41″)	109 cm (42 1/2″)
Waist	64 cm (25 1/2″)	68 cm (27″)	72 cm (28 1/2″)	76 cm (30″)	80 cm (31 1/2″)	84 cm (33″)	88 cm (34 1/2″)
Hips	92 cm (36 1/2″)	96 cm (38″)	100 cm (39 1/2″)	104 cm (41″)	108 cm (42 1/2″)	112 cm (44″)	116 cm (45 1/2″)

Finished garment measurements

Negative ease is included in the measurements below to make the garment smaller than the body.

	XS	S	S/M	M	M/L	L	XL
Bust	77 cm (30 1/2″)	81 cm (32″)	85 cm (33 1/2″)	89 cm (35″)	93 cm (36 1/2″)	97 cm (38″)	101 cm (39 1/2″)
Biceps	31.4 cm (12 1/4″)	32.6 cm (12 3/4″)	33.8 cm (13 1/4″)	35 cm (13 3/4″)	36.2 cm (14 1/4″)	37.4 cm (14 3/4″)	38.6cm (15 1/4″)
Length TOP	36 cm (14 1/4″)	37 cm (14 5/8″)	38 cm (15″)	39 cm (15 3/8″)	40 cm (15 3/4″)	41 cm (16 1/8″)	42 cm (16 1/2″)
Waist	72 cm (28 1/2″)	76 cm (30″)	80 cm (31 1/2″)	84 cm (33″)	88 cm (34 1/2″)	92 cm (36″)	96 cm (37 1/2″)
Hips	85.5 cm (34″)	89.5 cm (35 1/2″)	93.5 cm (37″)	97.5 cm (38 1/2″)	101.5 cm (40″)	105.5 cm (41 1/2″)	109.5 cm (43″)
Length SKIRT	86 cm (33 3/4″)	86.5 cm (34″)	87 cm (34 1/4″)	87.5 cm (34 1/2″)	88 cm (34 3/4″)	88.5 cm (35″)	89 cm (35 1/4″)

---

Sewing Notes

Here are some tips we recommend for a successful sewing project:

Fit and style

• For the top, choose a size according to your bust measurement, and for the skirt, according to your hips measurement. Refer to the body measurements chart. If needed, you may widen or narrow down the two pieces at the waist. Also, note that the pattern has negative ease, so it’s normal that the measurements are smaller than your body.
• On the finished garment measurements chart, you can also check the length of the garment and see if it’s suitable for your height. You may want to compare the length with a similar piece of clothing. The skirt is ankle length and the top is cropped at the waistline. Note that the skirt has a low waist, so the belt is sitting below the belly button.
• If you need to shorten or lengthen the garment to achieve this look, slash the pattern above the bottom edge of the garment. Then, spread to add length, or overlap to shorten. When you spread the pattern, fill in the gap with scraps of paper. Tape everything back in place.

Fabrics

• 4-way stretch means that the fabric can stretch both lengthwise and crosswise.
• Be sure that your fabric has the correct amount of stretch. For this style, I recommend 50% stretch, which means that a section of 10 cm (4″) can be stretched to 15 cm (6″) without a problem. If you feel any tension in the fabric before you reach the measurement, it means that your fabric doesn’t stretch enough.
• On another note, if you notice that it doesn’t spring back to its original shape once you’ve stretched it, your fabric might not have a good recovery. This means that you might end up with a lot of wavy seams and a garment that is increased in size at the end of the day. To help with this problem, be sure to use a knit with spandex (or Lycra).

Cutting out

• Preshrink the fabric before you start cutting it out. To do so, wash and dry the same way you would with the finished garment. This means you should also take into account the fabric type and its content.
• Once the fabric is washed and dried, press it to remove all the creases. Be sure that you’ve set your iron to a temperature that is suitable to the fabric. As a rule of thumb, synthetic fibers (acrylic, spandex, polyester…) should be pressed at low heat, and natural fibers (cotton, wool, linen…) should be pressed at high heat.
• When you’re ready to cut into the fabric, fold it lengthwise, right sides together. The fold should not twist and lay flat. If it’s twisting, unfold and fold again, until it lays flat. Then, place the pattern pieces so that the grainline is parallel to the selvages.
• Be sure that you don’t cut the notches too much, they should be about 0.3-0.4 cm long (1/8″).

Sewing

• To sew the slit, you will need to use a straight stretch stitch. Check your sewing machine manual if this type of stitch is available. The symbol looks like a lightning bolt. Otherwise, you can substitute this stitch for a regular zigzag, set to a narrow width.
• If you’re using a sewing machine, be sure that it’s equipped with a stretch or ballpoint needle. These needles have a rounder tip that prevents snags. If your machine is skipping stitches, the size of the needle may be too small, so be sure to have an assortment of needles with varying sizes.
• If your seams are very wavy, you might want to check for a walking presser foot for your sewing machine. On an overlocker, check to increase the differential or the stitch length.
• When you press your seams, press one section at a time, lifting the iron when going from one section to another. If you let the iron glide over the fabric, you might stretch out the seam.
• If the seams crack when stretched, be sure that you used a stretch stitch, and that the thread is all-purpose polyester, not 100% cotton. You may also reduce the thread tension. On an overlocker, reduce the tension of the needles, not the loopers, and reduce the differential or stitch length.

Good luck with your sewing project!

---

You can now support me on Ko-Fi! Any amount helps covering the fees for pattern making and illustrating software, fabrics, threads… If you can’t afford a donation, you can also support the blog by liking, sharing and commenting my posts. Thanks!!